Nokia N81 - Sleep Mode

Settings
118
closing it. Also, select whether the keypad is locked when
closing the slide.
Opening the slide—To select whether incoming calls are
answered when opening the slide, select Answer
incoming call or Call not answered.
Closing the slide—To select whether active calls are
ended when closing the slide, select End active call or
Continue active call.
Keyguard activation—To select whether the keypad is
locked when closing the slide, select On when closing
slide or Off when closing slide. To receive a query every
time when closing the slide, select Always ask.
Sleep mode
Press , and select Tools > Settings > General > Sleep
mode to enable or disable the blinking LED in the power
saver mode.
Select Off to disable the power saver LED for the sleep
mode.
Enhancement
Press , and select Tools > Settings > General >
Enhancement sett. to enable or disable the blinking LED
in the power saver mode.
For enhancement indicators, see ‘Essential indicators’,
p. 15.
The available settings depend on the type of enhancement.
Select an enhancement and from the following:
Default profile—Set the profile that you want activated
each time you connect a certain compatible enhancement
to your device. See ‘Profiles—set tones’, p. 100.
Automatic answer—Set if you want the device to answer
an incoming call automatically after 5 seconds. If the
ringing type is set to Beep once or Silent, automatic
answer is disabled.
Lights—Set whether lights remain on, or are switched off
after the time-out. This setting is not available for all
enhancements.
If you are using a TTY or a Loopset, you must activate it on
your device. To activate TTY, select TTY > Use TTY > Yes.
To activate the loopset, select Loopset > Use loopset >
Yes.
Security
To edit settings related to the security, press , and
select Tools > Settings > General > Security > Phone
and SIM card, Certificate management, or Security
module.