Cut, copy, or paste text
Drag your finger on the text to select, then select
and the
desired option.
Insert a line break
Select
.
Delete a character
Select
.
Switch between input languages
Select
and the language. You must have the languages
defined in the text input settings.
Close the virtual keyboard
Tap outside the virtual keyboard.
Switch between input methods
To switch between the virtual keyboard and the physical
keyboard, slide the touch screen up or down.
Switch virtual keyboard layout
The virtual keyboard can provide character sets for two
different input languages at the same time, for example, the
Russian and Latin character sets. To define the input
languages, modify the text input settings.
Switch between input languages
Press and hold the ctrl key, and then press the space key.
Text input settings
Select
> Settings and Text input.
Select from the following:
Hardware keyboard layout — Define the character set used
in the physical keyboard. Changing this setting may lead to
the physical keys not matching the hardware keyboard
layout.
Use virtual keyboard — Activate the virtual keyboard.
Word completion — Enable word completion.
Auto-capitalisation — Enable auto-capitalisation, to
capitalise the first letter of sentences automatically when
entering text.
Insert space after word — Insert a space after each
accepted word completion.
1st language — Select the first language. To select a
dictionary to use for the first language, select Dictionary and
the dictionary language.
2nd language — Select the second language. To select a
dictionary to use for the second language, select
Dictionary and the dictionary language. When you switch to
the secondary language, the current dictionary for the word
completion feature is also changed.
Introduction 27
© 2010 Nokia. All rights reserved.