Copyright © 2007 Nokia. All rights reserved.
Personalize your device
95
Scroll to the setting you want to change, and press to
open the choices. Tones stored on the memory card are
indicated with . You can scroll through the tone list
and listen to each one before you make your selection. To
stop the sound, press any key.
When you choose a tone, Tone downloads (network
service) opens a list of bookmarks. You can select a
bookmark and connect to a web page to download tones.
If you want the caller’s name to be said when your device
rings, select Options > Personalise, and set Say caller's
name to On. The caller’s name must be saved in Contacts.
To create a new profile, select Options > Create new.
Offline profile
The Offline profile lets you use the device without
connecting to the wireless network. When you activate the
Offline profile, the connection to the wireless network is
turned off, as indicated by in the signal strength
indicator area. All wireless RF signals to and from the
device are prevented. If you try to send messages, they are
placed in the outbox to be sent later.
Important: In the offline profile you cannot make
or receive any calls, or use other features that
require cellular network coverage. Calls may still be
possible to the official emergency number
programmed into your device. To make calls, you
must first activate the phone function by changing
profiles. If the device has been locked, enter the
lock code.
When you have activated the Offline profile, you can still
use the wireless LAN, for example, to read your e-mail or
browse the internet. Remember to comply with any
applicable safety requirements when establishing and
using a wireless LAN connection. See "Wireless LAN" on
page 81.
To leave the Offline profile, press the power key, and
select another profile. The device re-enables wireless
transmissions (providing there is sufficient signal
strength). If Bluetooth connectivity is activated before
entering the Offline profile, it will be deactivated. To use
Bluetooth connectivity in the Offline profile, reactivate it.
Bluetooth connectivity is automatically reactivated after
leaving the Offline profile. See "Settings" on page 76.
To Next Page
Loading...
