EasyManuals Logo

Nokia N93 User Manual

Nokia N93
269 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #241 background imageLoading...
Page #241 background image
Tools
108
Security settings for WEP are as follows:
Wep key in use—Select the WEP key number. You can
create up to four WEP keys. The same settings must be
entered on the wireless LAN access point device.
Authentication type—Select Open or Shared for the
authentication type between your device and the wireless
LAN access point device.
WEP key settings—Enter WEP encryption (length of the
key), WEP key format (ASCII or Hexadecimal), and WEP
key (the WEP key data in the selected format).
Security settings for 802.1x and WPA/WPA2 are as
follows:
WPA mode—Select the means of authentication: EAP to
use an extensible authentication protocol (EAP) plug-in or
Pre-shared key to use a password. Complete the
appropriate settings:
EAP plug-in settings (only for EAP)—Enter the settings as
your service provider instructs.
Pre-shared key (only for Pre-shared key)—Enter a
password. The same password must be entered on the
wireless LAN access point device.
TKIP encryption—Select whether Temporal Key Integrity
Protocol (TKIP) is used.
Homepage—Define a home page.
Select Options > Advanced settings and from the
following:
IPv4 settings: Phone IP address (the IP address of your
device), Subnet mask (the subnet IP address), Default
gateway (the gateway), and DNS address—Enter the IP
addresses of the primary and secondary DNS server.
Contact your internet service provider for these addresses.
IPv6 settings > DNS address—Select Automatic,
Well-known, or User defined.
Ad-hoc channel (only for Ad-hoc)—To enter a channel
number (1-11) manually, select User defined.
Proxy serv. address—Enter the address for the proxy
server.
Proxy port number
—Enter the proxy port number.
Packet data
The packet data settings affect all access points using a
packet data connection.
Packet data conn.—If you select When available and you
are in a network that supports packet data, the device
registers to the packet data network. Starting an active
packet data connection (for example, to send and receive
e-mail) is quicker. If there is no packet data coverage, the
device periodically tries to establish a packet data
connection. If you select When needed, the device uses a
9247473_N93_UG_en_hk.book Page 108 Tuesday, November 14, 2006 5:51 PM

Table of Contents

Other manuals for Nokia N93

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nokia N93 and is the answer not in the manual?

Nokia N93 Specifications

General IconGeneral
Zoom capability3x
Front camera typeSingle camera
Rear camera resolution2048 x 1536 pixels
Video capture resolution (max)640 x 480 pixels
2G standardsEDGE, GPRS
Ringer typePolyphonic
Panel typeTFT
Display diagonal2.4 \
Display resolution240 x 320 pixels
Display number of colors262144 colors
Internal memory50 MB
Compatible memory cardsminiSD
Multimedia Messaging Service (MMS)Multimedia Messaging Service (MMS) is a standard way to send messages that include multimedia content to and from a mobile phone over a cellular network
Bundled softwareAdobe Premiere Elements 2.0
Talk time (2G)5.1 h
Battery capacity1100 mAh
Standby time (2G)240 h
Product colorBlack
Weight and Dimensions IconWeight and Dimensions
Depth28.2 mm
Width55.5 mm
Height118.2 mm
Weight180 g

Related product manuals