Copyright © 2007 Nokia. All rights reserved.
Connectivity
84
been added, updated, deleted, or discarded (not
synchronized) in your device or on the server.
Connection manager
Press , and select Connect. > Conn. mgr.. To view the
status of data connections or end connections in GSM and
UMTS network and wireless LAN, select Act. data conn..
To search for wireless LANs available within range, select
Availab. WLAN.
Data connections
In the active connections view, you can see the open data
connections: data calls ( ), packet data connections
( ), and wireless LAN connections ( ).
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To end a connection, select Options > Disconnect. To
close all open connections, select Options > Disconnect
all.
To view the details of a connection, select Options >
Details. The details shown depend on the connection type.
Wireless LAN
The available wireless LAN view shows a list of wireless
LANs within range, their network mode (Infrastructure or
Ad-hoc), and signal strength indicator. is shown for
networks with encryption, and if your device has an
active connection in the network.
To view the details of a network, select Options > Details.
Create an IAP
1 Press , and select Connect. > Conn. mgr. >
Availab. WLAN.
2 The device searches for wireless LANs within range.
Scroll to the network in which you want to create an
IAP, and select Options > Define access point.
3 The device creates an IAP with default settings. To view
or change these settings, see "Access points", on page
105.
TV configuration
Press , and select Connect. > TV out. Select from the
following:
TV system — Select PAL for PAL and SECAM TV system
format or NTSC for NTSC TV system format.
Ratio — Select 4:3 or 16:9.
To Next Page
Loading...
