Transfer videos from your PC
Transfer your own video clips from compatible devices
using a compatible USB data cable. Only video clips
which are in a format supported by your device are
shown.
1. To view your device on a PC as a mass memory
device where you can transfer any data files,
connect using a USB data cable.
2. Select Mass storage as the connection mode.
3. Select the video clips you want to copy from your
PC.
4. Transfer the video clips to E:\My Videos in the mass
memory of your device, or to F:\My Videos in a
compatible memory card, if available.
The transferred video clips appear in the My videos
folder.
Video settings
Select Menu > Videos & TV.
Select Options > Settings and from the following:
● Video service selection — Select the video services
that you want to appear in the main view. You can
also add, remove, edit, and view the details of a
video service. You cannot edit preinstalled video
services.
● Connection settings — To define the network
destination used for the network connection, select
Network connection. To select the connection
manually each time a network connection is
opened, select Always ask.
● Parental control — Set an age limit for videos. The
required password is the same as the device lock
code. The factory setting for the lock code is 12345.
For video-on-demand services, videos which have
the same or a higher age limit than you have set, are
hidden.
● Preferred memory — Select where to save
downloaded videos. If the selected memory
becomes full, the device saves the videos in another
memory.
● Thumbnails — Select whether to download and
view thumbnail images of video feeds.
118
Videos
To Next Page
Loading...
