Nokia N97 - E-Mail Settings; Manage Mailboxes; Connection Settings

● Allow anonymous msgs. — Select whether you
want to reject messages from an anonymous
sender.
● Receive ads — Select whether you want to receive
multimedia message advertisements.
● Receive reports — Select whether you want the
status of the sent message to be shown in the log
(network service).
● Deny report sending — Select whether you want
to prevent your device from sending delivery reports
of received messages.
● Message validity — Select for how long the
message center resends your message if the first
attempt fails (network service). If the message
cannot be sent within this time period, the message
is deleted from the message center.
E-mail settings
Manage mailboxes
Select Menu > Messaging and Options > Settings >
E-mail.
To select which mailbox you want to use to send and
receive e-mail, select Mailbox in use and a mailbox.
To remove a mailbox and its messages from your
device, select Mailboxes, tap the mailbox to be
removed if it is not already highlighted, and select
Options > Delete.
To create a new mailbox, select Mailboxes >
Options > New mailbox. The name you give to the
new mailbox replaces Mailbox in the Messaging main
view. You can have up to six mailboxes.
Select Mailboxes and a mailbox to change the
connection settings, user settings, retrieval settings
and automatic retrieval settings.
Connection settings
Select Menu > Messaging and Options > Settings >
E-mail > Mailboxes, a mailbox, and Connection
settings.
To edit the settings for the e-mail you receive, select
Incoming e-mail, and from the following:
● User name — Enter your user name given to you
by your service provider.
● Password — Enter your password. If you leave this
field blank, you are prompted for the password
when you try to connect to your remote mailbox.
● Incoming mail server — Enter the IP address or
host name of the server that receives your e-mail.
● Access point in use — Select an internet access
point (IAP).
● Mailbox name — Enter a name for the mailbox.
● Mailbox type — Defines the e-mail protocol that
your remote mailbox service provider recommends.
The options are POP3 and IMAP4. This setting cannot
be changed.
58
Messaging