● Change command — Edit the voice commands.
● Playback — Listen to the synthesized voice tag.
● Remove voice command — Remove a voice
command that you added manually.
● Settings — Adjust the settings.
Sensor settings and display
rotation
When you activate the sensors in your device, you can
control certain functions by turning the device.
Select Menu > Settings and Phone > Sensor
settings.
Select from the following:
● Sensors — Activate the sensors.
● Turning control — Select Silencing calls and
Snoozing alarms to mute calls and snooze alarms
by turning your device so that the display faces
down. SelectAuto-rotate display to rotate the
display content automatically when you turn the
device on its left side or back to a vertical position.
Some applications and features may not support
rotating the display content.
Slide settings
Select Menu > Settings and Phone > Phone
mgmt. > Slide settings.
To set the device to lock the keypad when you close the
slide, select Lock keys with slide close.
Accessory settings
Select Menu > Settings and Phone > Accessories.
Some accessory connectors indicate which type of
accessory is connected to the device.
Select an accessory and from the following:
● Default profile — Set the profile that you want
activated each time you connect a certain
compatible accessory to your device.
● Automatic answer — Select whether you want the
device to answer an incoming call automatically
after 5 seconds. If the ringing type is set to Beep
once or Silent, automatic answer is disabled.
● Lights — Set whether lights remain on after the
time-out.
The available settings depend on the type of accessory.
TV-out settings
To change the settings for a TV-out connection, select
TV-Out and from the following:
● Default profile — Set the profile that you want
activated each time you connect a Nokia Video
Connectivity Cable to your device.
● TV aspect ratio — Select the aspect ratio of the TV:
Normal or Widescreen for widescreen TVs.
132
Settings
To Next Page
Loading...
