Need help?Do you have a question about the Nokia RH-38 Series and is the answer not in the manual?
General| Category | Transceiver |
|---|---|
| Model | RH-38 |
| Frequency Range (TX) | 450-470 MHz |
| Frequency Range (RX) | 450-470 MHz |
| Modulation | FM |
| Supply Voltage | 13.8 V DC |
| Dimensions | 160 x 55 x 175 mm |
| Weight | 1.4 kg |
Protect display, remove battery cover, open A-cover, unlock and remove Keymat, and unscrew case screws.
Remove C-Cover, LCD, speaker, engine module, shielding, system connector, and microphone.
Lever out Vibra Motor and remove Buzzer, taking care not to damage spring contacts.
Loosen, tear off the old Domesheet, and prepare a new one from the carrier film.
Position the new Domesheet, place the Engine Module, and ensure alignment before final seating.
Press the Domesheet firmly to avoid bubbles and verify hole alignment with the Engine Module.
To Next Page
