90
Channels are registered with a URL address. One user registers the channel URL in
the network by joining the channel the first time.
Create your own channel
1. Select Options > PTT channels.
2. Select Options > New channel > Create new.
3. Enter a Channel name.
4. Select a Channel privacy level.
5. Enter your own nickname in Nickname.
6. If you want to add a thumbnail image to the group, select Thumbnail and an
image.
7. Select Done. When you have created a channel, you are asked if you want to
send channel invitations. Channel invitations are text messages.
Join a preconfigured channel
A preconfigured channel is a talk group that is set up by your service provider.
Only preconfigured users are allowed to join and use the channel.
1. Select Options > PTT channels.
2. Select Options > New channel > Add existing.
3. Enter the Channel name, Channel address, and Nickname. You can also add a
Thumbnail.
4. Select Done.
Respond to a channel invitation
To save a received channel invitation, select Options > Save channel. The channel
is added to your PTT contacts, channels view.
PTT sessions
PTT sessions are displayed as call bubbles in the PTT display, giving information
about the status of the PTT sessions:
Wait—shown when you press and hold the call key and somebody else is still
speaking in the PTT session
Talk—shown when you press and hold the call key and get the permission to speak
To switch the loudspeaker on or off, select Options > Activate loudspeaker or
Deactivate loudspeaker.
To Next Page
Loading...
