such as URL links, e-mail addresses, and phone
numbers.
1. To scan a code, select Scan code.
2. Set the code to fit the display.
The application attempts to scan and decode the
code, and the decoded information appears on
the display.
When viewing the decoded information, the
different links, URL links, phone numbers, and e-
mail addresses are indicated by icons on the top
of the display in the direction they appear in the
decoded information.
3. To save the scanned data, select Options >
Save.
The data is saved in .bcr format in the Saved
data folder.
To select the memory where the information is
saved, select Options > Settings > Memory
in use.
4. To use the decoded information, select
Options and the desired action.
The device reverts to the standby mode to save
battery power if the barcode reader cannot be
activated or if no keys are pressed for 1 minute.
139
Office folder
© 2008 Nokia. All rights reserved.
To Next Page
Loading...
