Nokia RM-325 - Speed Dialling; Voice Dialling; Options During a Call

20
Calls
F
CC
• To reject a call, press the end key.
Use the secondary display:
To activate the tap settings, select Menu > Settings > Phone > Sensor settings.
• To mute a ringing tone, double tap the secondary display. Sound will be
restored for the next incoming call.
• To reject the call, double tap the secondary display again.
■ Speed dialling
To assign a number to one of the speed-dialling keys, 3 to 9:
1. Select Menu > Contacts > Speed dials.
2. Scroll to the speed-dialling number that you want.
3. Select Assign, or, if a number has already been assigned to the key, select
Options > Change.
4. Enter the number or select Search and the contact you want to assign.
If speed dialling is deactivated, the phone asks whether you want to activate it.
Select Menu > Settings > Call > Speed dialling > On.
To call a number, press and hold a speed-dialling key until the call begins.
■ Voice dialling
Make a phone call by saying the name that is saved Contacts.
As voice commands are language-dependent, before voice dialling, you must
select Menu > Settings > Phone > Voice recognition > Recognition lang., and
your language. Do the Voice recog. training from the instructions on the display.
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialling in all circumstances.
1. In the standby mode, press and hold the right selection key. A short tone
sounds, and Speak now is displayed.
2. Speak the name of the contact you want to dial. If the voice recognition is
successful, a list with matches is shown. The phone plays the voice command
of the first match on the list. If the match is incorrect, scroll to another entry.
■ Options during a call
Many of the options that you can use during a call are network services. For
availability, contact your service provider.