16 Copyright © 2008 Nokia. All rights reserved.
Get started
Switch the phone on and off
1 Press and hold the power key.
2 If the phone asks for a PIN or a UPIN
code, enter the code (displayed as ****),
and select OK.
When you switch on your phone for the first
time, and the phone is in the standby mode,
you are asked to obtain the configuration
settings from your service provider (network
service). Confirm or decline the query. See
"Configuration", p. 42, and "Configuration
settings service", p. 16.
Set the time, zone, and date
When you switch on your phone for the first time, the
phone is in the standby mode, and you are asked to set the
time and date. Fill in the fields, and select Save.
To access Date and time later, select Menu > Settings >
Date and time > Date & time settings, Date and time
format, or Auto-update of time (network service) to
change the time, time zone, and date settings.
Configuration settings service
To use some of the network services, such as mobile
internet services, MMS, Nokia Xpress audio messaging, or
remote internet server synchronisation, your phone needs
the correct configuration settings. For more information
on availability, contact your network operator, service
provider, nearest authorised Nokia dealer, or see the
support area on the Nokia website, www.nokia-asia.com/
6212classic/support.
When you receive the settings as a configuration message,
the settings are not automatically saved and activated.
Configuration settings received is displayed. Select
Show > Save. If required, enter the PIN code supplied by
the service provider.
Antenna
Your device may have internal and
external antennas. As with any radio
transmitting device, avoid touching the
antenna area unnecessarily while the
antenna is transmitting or receiving.
Contact with such an antenna affects the
communication quality and may cause
the device to operate at a higher power
9210094_6212classic_en_apac.book Page 16 Wednesday, July 30, 2008 2:29 PM
To Next Page
Loading...
Need help?
General
