Need help?Do you have a question about the Nokia RM-840 and is the answer not in the manual?
Important safety warnings regarding device operation and potential hazards.
Precautions to ensure safe and correct servicing and handling procedures.
Guidance on who is authorized to perform installation or repair of phone equipment.
Overview of hardware characteristics, supported codecs, display, and SIM features.
Specifications including transceiver general specs and main RF characteristics.
Detailed RF parameters for cellular systems, including frequency bands and output power.
Overview of general tools, specific tools, and cables used for testing and repair.
Explanation of concepts like POS flash, flashing, certificate restore, and RF tuning.
Guidelines for identifying and correcting basic baseband related faults using LAB equipment.
Procedure for initiating and performing baseband self-tests using the Care Suite PST.
Troubleshooting steps for power and charging issues, including dead or jammed devices.
Troubleshooting flow for devices that do not power on or appear jammed.
Methodology for checking high current issues upon power on or battery insertion.
Troubleshooting flow for issues related to the phone not identifying or charging correctly.
Diagnosis and troubleshooting for problems related to the 26MHz and 32KHz clocks.
Troubleshooting steps for issues where the power-on key is not functioning.
Steps for troubleshooting connectivity issues with flash programming and memory.
Troubleshooting flow for failures during flash programming via USB or connector.
Guide for performing manual tuning procedures for the baseband.
Procedure for calibrating energy management settings for accurate AD conversion.
Step-by-step guide for restoring the device's certificate.
Procedure for changing the product code of the device using specific software.
List of recommended equipment for performing RF measurements.
Primary troubleshooting flow for cellular RF related issues.
Troubleshooting steps for RF power supply issues identified by self-tests.
Procedures for performing RF tuning and testing using Nokia Care Suite.
Step-by-step guide for performing automatic RF tuning using the T&TT software.
Methods for analyzing image quality, focusing on dust and dirt detection.
Techniques to detect dust particles on the image sensor or optical path.
Diagnostic steps for blurry images, including checking window, lens, and lighting.
Troubleshooting flow for general bad camera image quality issues.
Information on battery connector, voltage range, and charging parameters.
Explanation of the power key function and the system start-up sequence.
Technical description of the RF block, including transceiver, PA, and FEM components.
Details on the Quark platform's RF block components for GSM and UMTS.
To Next Page
General
