Need help?Do you have a question about the Nokia 2000 and is the answer not in the manual?
General| Announced | 2000 |
|---|---|
| SIM | Mini-SIM |
| Display Type | Monochrome graphic |
| Phonebook | Yes |
| Loudspeaker | No |
| 3.5mm jack | No |
| Messaging | SMS |
| Radio | No |
| Internal memory | No |
| Network | GSM |
| Alert types | Vibration; Monophonic ringtones |
Important safety warnings for device operation and installation.
Guidelines for authorized personnel performing installation or repair.
Details on phone models and their hardware/software features.
Detailed technical data including transceiver and battery specs.
Guidelines for identifying and correcting baseband faults.
Troubleshooting steps for phones that do not power on.
Diagnosing issues related to excessive current draw.
Guidance for resolving flash programming failures.
Procedures for diagnosing charger identification and charging issues.
Steps for diagnosing SIM card recognition and rejection issues.
Steps for diagnosing audio output and input issues.
Overview of RF measurement types and ESD precautions.
Procedures for identifying failed components after disassembly.
Steps for troubleshooting the Low Band receiver path.
Steps for troubleshooting the High Band receiver path.
Steps for troubleshooting the Low Band transmitter path.
Steps for troubleshooting the High Band transmitter path.
Steps for verifying and calibrating phone functions in local mode.
Overview of the software for testing and tuning.
Using the tool for RF tuning procedures.
Common Bluetooth issues and their repair solutions.
Introduction to the baseband engine and its features.
Identification of major components on the baseband side.
Detailed functions of the baseband processor and its interfaces.
Steps involved in the phone's power-up process.
Introduction to the RF section design.
Overview of the RF subsystem and its capabilities.
Description of the transmitter signal path.
To Next Page
