Nokta Velox One User Manual

SENSITIVITY
For maxmum depth, do not turn the ground balance knob to the rght more than necessary.
Generally speakng, the md-level (between 4-7) oers the most deal and stable detecton
capablty on derent types of ground wthout sacrfcng depth.
As the ground balance goes nto the rght area, the devce wll start losng depth for some
non-ferrous metals except for gold. When the ground balance settng reaches the maxmum
pont the devce wll detect ron and gold but t wll not detect some non-ferrous metals.
If you are searchng on a ground loaded wth mneralzed stones or dps and holes, t s recommended to ground balance over
one of these stones or the holes.
In areas of very hgh mneralzaton, ground balance may not be sucent. In such a case, you may need to use the mneral
search modes (see page 16).
Senstvty settng s used to elmnate nterferences caused by electromagnetc waves n the
surroundng envronment or ground nose. Electromagnetc waves may result from power
lnes n the surroundng envronment or from the operaton of electrcal devces, radars,
wreless rados, and even TVs.
Senstvty s also the depth settng for the devce. Therefore, especally n hgh
mneralzaton, t s recommended that you lower t only f the devce s stll gettng nose
after you adjust all the other settngs (ground balance, ron dscrmnaton and mneral
modes).
SENSITIVITY
CONTROLS
14
GROUND BALANCE

Nokta Velox One Specifications

General

Brand	Nokta
Model	Velox One
Category	Metal Detector
Language	English