'%%
The ventilation system of the N104 helmet consists of:
- :B0=A09?47,?4:9allows ventilation in the mouth and visor area. To open the
ventilation system operate the slider as indicated in figure 17. To close the venti-
lation system operate the slider in the opposite direction.
- %:;A09?47,?4:9 allows ventilation in the top area of the head thanks to the inno-
vative # $%# system that channels the air coming from the top air intake
by directing it in the top area of the rider's head without any dispersion.
To open the top ventilation system move the slider to the first notch (Fig. 18).
To close the top ventilation system move the slider to the initial position.
- =:9?A09?47,?4:9 allows ventilation in the front area of the head. To open the
front ventilation system move the slider of the top air intake until its limit stop (Fig.
19). To close the front air intake move the slider to the initial position.
- #0,=,4=0C?=,.?:=>allow warm and stale air to flow out ensuring an optimum
comfort inside the helmet.
(#
The front air intake can be opened only if the top air intake is open.
21