1-Plug 1-Minute Self Shaping Tree
151-0304-8
INSTRUCTION MANUAL
Thank you for purchasing this pre-lighted tree. For your convenience, it is equipped with an on/off foot pedal switch for easy
illumination.
This 6 ½' (2 m) tree is pre-strung with 350 mini lights:
CARTON INCLUDES:
• 3 pre-lighted tree sections (A – Top Section, B – Middle Section, C – Bottom Section)
• 1 sturdy metal tree stand
• 1 screw for tree stand
• 7 extra 2.5 V replacement bulbs
• 1 spare replacement fuse (5 A) for extension cord. Note fuse is already in extension cord plug, slide
access panel to open (see Fuse Replacement below)
FOR INDOOR/SEASONAL USE ONLY
ASSEMBLY
Note: Before you start to assemble your tree please choose a location near an electrical wall outlet. Place the tree stand on a
level surface.
Please remove plastic protective covers from the base of the pole for each tree section before assembling.
1. Unfold the tree base and insert the screw into the hole.
2. Carefully insert bottom section (C) of tree into tree base and tighten the screw. (Fig. 1)
To Next Page
Need help?
General
