NOMA 151-8409-2 User Manual

7' PRE-LIT MICROBRITE SNOW DUSTED PINE
model no. 151-8409-2 | Toll-free number: 1-866-827-4985
3. Each tree section is numbered with a sticker. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Start with the bottom section. Remove the protective cap before inserting it into the
already pre-assembled stand. Before proceeding to the next step, make sure the pole is firmly inserted and secured into the stand.
5. Continue by inserting the upper tree section(s) into the lower section(s) until inserting the tree top.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet. Do not plug the adaptor into the wall
outlet until all of the steps below are completed.
2. First assemble the tree stand and place on a level surface. (See Fig. A)
Carefully follow the instructions below to quickly and easily set up your tree.
Tree top
Section 2
Section 1
Fig. B - Tree and Light Assembly
TREE ASSEMBLY INSTRUCTIONS
Fig. A - Tree Stand Assembly
Click
Swivel the legs of the stand until they snap
into position. The legs should be evenly
spaced once this step is complete. Place the
tree stand on a level surface.
To close the stand, press the metal button
and fold the legs together.
Instruction Manual
For indoor use only
Retain carton for storage purposes
IMPORTANT: Please read this manual carefully before assembly and save it for reference.
Control box
Adaptor
To Be Plugged
Into Wall
Outlet
*Electrical Rating For The Tree
(For Indoor Use Only.)
Input: 120 V, 60 Hz, 0.38 A
Output: 29 V DC, 0.62 A
Foot Pedal
On/Off Switch
Do Not Tamper
With Internal Parts
Open the
protective
cover
Do Not Tamper
With Internal Parts
Open the
protective
cover
100S
100S
50S
100S
100S
100S
100S

NOMA 151-8409-2 Specifications

General

Height	7.5 feet
Light Color	Warm White
Bulb Type	LED
Color	Green
Base Type	Metal Stand
Tree Width	54 inches
Material	PVC

Summary

Tree Assembly Instructions

Tree Stand Assembly

Assemble the tree stand by swiveling legs until they snap into place on a level surface.

Tree Section Assembly

Assemble tree sections from bottom to top, ensuring poles are firmly inserted and secured into the stand.

Storage Instructions

Disassemble and Pack Tree

Unplug the tree, disassemble from top to bottom, fold branches, and pack sections carefully into the shipping box.

Storage Guidelines

Store the tree in a cool, dry place away from sunlight to prevent damage; dispose of batteries properly.

Operating Instructions

Light Effect Customization

Customize light functions by selecting from 7 preset effects and 5 brightness levels using the controller.

Timer and Memory Features

Understand the default 8-hour timer and the memory function that recalls the last selected light settings.

Remote Control Battery Replacement

Troubleshooting

Tree Not Illuminating

Check connections, power outlet, and foot pedal if the pre-lit tree does not illuminate.

Spare Parts

Hinge Pins and Washers

Includes hinge pins and washers for repairing hinges; contact customer service for extra parts.

Safety Cautions

Electrical and Installation Safety

Use only provided power supply, avoid metal branches, and do not damage wire insulation.

Warranty Information