NOMA 52-4075 - User Manual

598-1284-00
Security Light with
Motion-activated Sensor
Models 52-4075 / 52-4076
Features
• Turns on lighting when motion is detected.
• Automatically turns lighting off.
• Photocell keeps the lighting off during daylight hours.
Requirements
• The Light Control requires 120-volts AC.
• If you want to use Manual Mode, the control must be
wired through a switch.
• Some codes require installation by a qualified elec-
trician. Please check the codes in your area.
• This product is intended for use with a junction box
marked for use in wet locations.
• The backplate has knockouts so the sensor can be
mounted on most junction boxes.
• In some applications a universal adaptor plate may
be needed. Adaptors are available at home centers
and electrical supply stores.
Cover
Plate
Light Control
Lamp Holders
Sensor
2 Wire
Connectors
Gasket
4 Mounting
Screws (2 sizes)
This package includes:
OPERATION
* resets to Auto Mode at dawn.
Note: When first turned on wait about 1
1
/
2
minutes for
the circuitry to calibrate.
MANUAL MODE
ON-TIME
10 5 1 TEST
10 5 1 TEST
ON-TIME
TEST
... back on.
AUTO
1 Second OFF
then...
Put the ON-TIME switch in the 1, 5,
or 10 minute position.
Put the ON-TIME switch on the bottom
of the sensor in the TEST position.
Manual mode only works at night
because daylight returns the sensor
to AUTO.
Flip the light switch off for one second
then back on to toggle between AUTO
and MANUAL MODE.
Manual mode works only with the
ON-TIME switch in the 1, 5, or 10
position.
Move ON-TIME Switch to
1, 5, or 10 minutes
Mode Switching Summary
Flip light switch off
for one second then
back on*
MANUAL MODE
AUTO
TEST
* If you get confused while switching modes, turn the
power off for one minute, then back on. After the cali-
bration time the control will be in the AUTO mode.
This product is ENERGY STAR
®
compliant
when used with 120 Watt bulbs.
Mode: On-Time: Works: Day Night
Test
5 Sec x x
Normal
1, 5, 10 min. x
Manual
Until Dawn* x
Installation and Operating
Instructions

Summary

Operation

Mode Settings

Details ON-TIME settings and operational modes (Day/Night).

Test Mode Operation

Instructions for setting the sensor to TEST mode.

Auto Mode Operation

Instructions for setting the sensor to AUTO mode.

Manual Mode Operation

How to activate and use manual mode.

Mode Switching Summary

Visual guide to switching between modes.

Installation

Wire the Light Control

Connect the light control wires to the junction box wires.

Mount the Light Control

Secure the cover plate to the junction box and mount the fixture.

Test and Adjustment

Aiming and Sensitivity Adjustment

Guides for aiming the sensor and adjusting sensitivity.

Time Delay Setting

How to set the duration lights stay on after motion.

Specifications

Technical details including range, angle, and load.

Troubleshooting

Lights Will Not Come On

Lists causes and solutions for lights not activating.

Lights Come On In Daylight

Explains reasons for daylight activation.

Lights Come On For No Apparent Reason

Addresses false triggering issues.

Lights Stay On Continuously

Troubleshooting for continuous light operation.

Lights Flash On and Off

Explains causes for intermittent light activation.

NOMA 52-4075 Specifications

General

Brand	NOMA
Model	52-4075
Category	Outdoor Light
Language	English