What to do if the light on my NOMA ASHTON Fan does not work?
If the NOMA Fan light is not working, first, check the black wire from the receiver to ensure it's connected to the hot wire from the supply wire coming out of the ceiling. Also, check for any loose or disconnected wires in the light kit.
How to troubleshoot a NOMA ASHTON that does not start?
If your NOMA Fan is not working, there are several things you can check: * Ensure the main and branch circuit fuses or circuit breakers are in working condition. * Confirm that the wall switch is turned to the 'ON' position. * Inspect the wire connections by removing the canopy. * Verify that the fan is installed within a maximum distance of 40’ (12.2 m) from the transmitting unit to ensure proper signal transmission.
What to do if the NOMA ASHTON Fan remote control is not working?
If the remote control for your NOMA Fan isn't working, avoid connecting the fan to wall-mounted variable speed controls or dimming devices. You can also try resetting the transmitter by going through the transmitter 'LEARNING PROCESS'.
Why is my NOMA ASHTON so noisy?
If your NOMA Fan is making noise, ensure all screws in the motor housing are snug but not over-tightened. Also, check that the screws attaching the fan blades or blade brackets to the motor are tight and that the hanger bracket is securely attached to the outlet box with tight screws. Finally, allow a 'break-in' period of 24 hours for the fan.
How to fix a NOMA ASHTON Fan that wobbles?
If your NOMA Fan wobbles, make sure all blades are screwed firmly into blade brackets and that all blade brackets are tightened securely to the motor. Also, ensure the canopy and hanger bracket are tightened securely to the ceiling outlet box, and the outlet box is mounted firmly to the ceiling joist. Most wobble problems are caused when the blades are not at the same level. You can also refer to page 23-DYNAMIC BLADE BALANCING KIT.
Why does my NOMA ASHTON Fan move backwards and forwards when turned on?
This back and forth movement is a normal start-up procedure for DC motor fans.
Details on connecting the fan's electrical wiring, including safety warnings.
Steps for safely attaching the hanger bracket and assembling the downrod.
Steps for installing the canopy, downrod cover, and hanging the fan onto the bracket.
Securing the safety cable and connecting the fan's electrical wires.
Steps for canopy cover, blade attachment, and removing protective blocks.
Steps for attaching blade brackets, light plate, and LED assembly.
Instructions for installing the battery and using the remote control functions.
Steps to pair the remote control with the fan for individual operation.
Details on using the fan speed buttons, light functions, and reverse button.
Steps for securing blades, checking alignment, and pitch.
Instructions for applying the balancing clip and weight to correct wobble.
Details the one-year limited warranty against defects in workmanship and materials.
Information on recycling used appliances and proper battery disposal.
To Next Page
General
