NOMA Quatra 052-9329-2

Questions and Answers

D
David CampbellAug 6, 2025
Why is my NOMA Quatra 052-9329-2 Fan so noisy?
- R
  rbrooksAug 6, 2025
  There are several reasons why your NOMA Fan might be noisy during operation. It could be due to loose blade screws, a loose mounting bracket or canopy, loose screws securing the decorative housing, a loose light kit or bulb, loose screws securing the downrod, wire connectors vibrating inside the canopy, a light kit or bulb not firmly attached, the canopy rattling against the ceiling, or loose motor housing screws. Check and tighten all screws, ensure the canopy isn't touching the ceiling, and reposition any vibrating wire connectors after disconnecting power at the fuse box. Remove and re-attach light kit or bulb if it is not firmly attached.
B
briannasawyerAug 12, 2025
What to do if my NOMA Quatra 052-9329-2 Fan does not start?
- J
  Jesus MartinezAug 12, 2025
  If your NOMA Fan doesn't start, the issue might be a blown fuse or a tripped circuit breaker. Check the main fuse and branch circuit fuses or circuit breaker and repair as necessary. Another possible cause is loose or incorrect power line connections to the fan or switch wires. Inspect all wire connections to the fan and housing wiring, repairing them if needed.
T
Taylor RobertsonAug 20, 2025
Why does my NOMA Quatra 052-9329-2 wobble or shake excessively?
- M
  Michelle JonesAug 20, 2025
  If your NOMA Fan wobbles or shakes excessively, check that the screws securing the fan blade clips to the motor are fastened and tightened. Also, ensure that the fan blade and its blade clip are securely fastened by tightening the screws. Finally, make sure that the canopy and mounting bracket are tightened securely to the ceiling joist.
M
Matthew BryantAug 27, 2025
How to improve air flow from my NOMA Quatra 052-9329-2?
- R
  Ryan PrattAug 28, 2025
  If your NOMA Fan doesn't seem to move much air, it could be in reverse (blades moving clockwise). For warm weather, counter-clockwise (forward) direction is recommended. Also, ensure the fan is properly located in the center of the room with at least 12 inches (30 cm) of space between the blade ends and any walls or obstructions.