9
How can I adjust the L500's color settings?
Step 1. Connect one end of an HDMI cable to the HDMI port of your video device.
Step 2. Press the Settings button on the remote control.
Step 3. Use the Left / Right buttons to enter the sub-menu and adjust the Color Mode.
Step 4. Use the Up / Down buttons to select a menu and adjust the Brightness/Contrast/Color
Temp./Gamma settings.
What type of laser technology does the L500 use?
The L500’s RGB tri-laser projector technology delivers a bright and wide color gamut offering the
BT2020 color gamut which performs better than the REC709 standard color.
To Next Page
Loading...
