4
Remote Control
Initial Setup
Power
Focus
Settings
OK/Up/Down/Left/Right
Return
Home
Increase volume
Play/Pause (Only supports built-in media player.)
Decrease volume
Mute
Step 1. Go to Apps Center > RC BT Pairing
Step 2. Press and hold the Return and Menu buttons simultaneously for 3 seconds
Step 3. Pairing successful
Step 1. Connect the power cord to L500
Step 2. Press the Power Key
Step 3. A solid green light will stay on after the startup
Bluetooth Remote Control
Turning on L500
Step 1. Download the NOMVDIC Remote Control app onto your smartphone
Step 2. Connecting your phone and the projector to the same Wi-Fi Network
Step 3. Open the NOMVDIC Remote Control app and select the projector (NOMVDIC XXXX)
NOMVDIC Remote Control App
1
2
7
3
8
4
9
10
5
6
To Next Page
Loading...
