Nomadic L500 - Cable Connected Projection

6
Via USB Flash Drive
Connect your USB ash drive to the USB-A port
Go to Home > File Management
Choose the le you wish to open
Step 1.
Step 2.
Step 3.
Cable Connected Projection
Shutting Down the Projector
Via HDMI Cable
Via USB-C Cable
Connect one end of the HDMI cable to your device (e.g., PC, laptop)
Connect the other end of the HDMI cable to the HDMI port on L500
In Home, select HDMI on the left column
Press Power Button on the remote control, choose Turn O, or press Power Button on the projector
to turn o the projector
Connect one end of the USB-C cable to your device (e.g., mobile phone, Nintendo Switch)
Connect the other end of the USB-C cable to the USB-C port on L500
In Home, select USB C on the left column
Step 1.
Step 2.
Step 3.
Step 1.
Step 2.
Step 3.
Via NOMVDIC AppStore
Go to Home > Apps Center > App Store
Choose the app you wish to download (e.g., Netix, SmartTube)
After installation, log in with your account and password (a mouse or remote app is required
when log in)
Step 1.
Step 2.
Step 3.