How do I optimize the P1000 for the best gaming experience?
NOMVDIC introduced Ultra Fast Input to enhance gaming performance. Ultra Fast Input improves frame
rate while playing a game. As such, a quick response time in the 1080p,1440p, and native timing can be
achieved.
To enable Ultra Fast Input:
Step 1. Press the menu button on the remote control
Step 2. In Menu > Advanced, go to Ultra Fast Input and press to enable.
Please note that when enabled, the following settings (if applicable) will return to factory preset values:
Aspect Ratio, Zoom, OverScan, Keystone, 4 Corner, Warping.
How do I connect the P1000 to my speaker?
For an advanced audio experience, you can connect the P1000 to your speaker via Bluetooth following the
below instructions:
Step 1. In Home > Bluetooth, select Bluetooth out
Step 2. Set your Bluetooth speaker to pairing mode
Step 3. Find your speaker in the device list and press OK to connect
Note: If you wish to switch to a different video source, make sure you disconnect by selecting the
Bluetooth speaker on the device list to forget the current device.
8
To Next Page
Loading...
