Nomadic R150 - Safety Precautions; General Safety Precautions

14
Remote Control
Power
Settings Display the Settings menu
OK/Up/Down/Left/Right/Confirm the selection
Return
Home
Increase
Play/Pause
(Only supports built-in media player.)
Decrease
Mute
Initial Setup
Connect the power cord to R150
Fully charge R150 upon initial use. The light indicator next to the volume button will show the battery
capacity. It takes about 3 hours to fully charge the projector.
Switch the Power Toggle to the ON position.
A solid green light will stay on after the startup.
Step 1.
Step 2.
Step 3.
Step 4.
NOTE : The focus button on the remote control will not respond to R150. To focus, adjust the focus wheel next to the lens.
Step 1. Go to Apps Center > RC BT Pairing
Step 2. Press and hold the and buttons simultaneously for 3 seconds.
Step 3. Pairing successful
Bluetooth Remote Control
Step 1. Download the NOMVDIC Remote Control app onto your smartphone.
Step 2. Connecting your phone and the projector to the same Wi-Fi Network.
Step 3. Open the NOMVDIC Remote Control app and select the projector (NOMVDIC XXXX).
NOMVDIC Remote Control App
Turning on R150
Overview
1.
2.
3.
4.
5.
6.
7.
8.
9.
Play/Pause Button
Volume Control
Power Toggle
Battery Indicator
Harman Kardon Speakers
Focus Adjustment Wheel
Lens
IR Sensor
Tripod mount
Getting Started
What’s Included
3
5
1
4
2
678
3
5
1
4
2
678
3
5
1
4
2
678
A
B
C
D E
F G
H I
A
F
B
G
C
H
D
I
E