Nomadic R150 - Using R150 as a Bluetooth Speaker; Faqs

54
Using R150 as a Bluetooth Speaker FAQs
How to pair R150 with your mobile phone for the first time
Shutting Down the Projector
Go to Home > Bluetooth
Select Bluetooth Pairing. A sound eect will be audible upon pairing.
On your phone, choose NOMVDIC R150. Upon successful connection, another sound eect will be
audible.
Press Power Button on the remote control, choose Turn O.
Switch the Power Toggle to OFF to turn o the projector.
Step 1.
Step 2.
Step 3.
Step 1.
Step 2.
After the first successful pairing, you can turn on the Bluetooth speaker mode by going to Home > Bluetooth,
and selecting Bluetooth Speaker. Your device will pair with R150 automatically.
How do I AirPlay/Screen Mirroring the content on my phone to R150?
To connect to AirPlay or screen mirror, ensure your device is connected to the same network as the
projector. It is recommended to use a 5GHz Wi-Fi network for best results.
For iOS
Step 1. Access the drop-down control menu.
Step 2. Select the “Screen Mirroring” icon.
Step 3. Choose “NOMVDIC XXXX”.
For Android
Step 1. Download and install the “Google Home” application and open it.
Step 2. Pull to refresh the app and wait for 30 seconds.
Step 3. “NOMVDIC XXXX” will now be visible, select it
Some Android devices support direct “Casting”. If your device does, go to the Casting feature and choose
“NOMVDIC XXXX” from the list of available devices.
Please note that AirPlay and Screen Mirroring are no longer supported by major streaming services such as
Netflix and Disney+.
How do I clean the projector?
Please refrain from forcefully pressing the buttons, as it might damage the surface and the structure of the
button.
To clean the projector lens, please use a microfiber fabric to prevent scratches or damage to the surface.
DO NOT use any kind of chemical cleaner. You can clean the projector body with a slightly damp towel to
wipe o the dust.