136
CLEANING, MAINTENANCE AND STORAGE
A. Cleaning
WARNING! Do not use any abrasive or solvent-based cleaner. Do not immerse the appliance in water.
Before clearing, the appliance must be switched off, unplugged from main socket and already
cooled down.
From time to time, wipe the appliance with a dry and soft cloth.
B. Maintenance
No maintenance is necessary. The equipment is only to be repaired by qualified specialists.
C. Storage
Always store your product in a fresh and dry room, away from humidity. To avoid any accident, make
sure children can't reach it.
TROUBLE SHOOTING
If you face some technical problem with your charger, please refer to below table for any help.
If below solutions do not provide any help, thanks to bring back your aplliance where you purchased it,
to be checked by after-sales service.
Never repair or modify the product yourself.
PROBLEM POSSIBLE REASON SOLUTION
Charger is not working The plug is not well connected to
main socket
Firmly connect the power supply to
the main socket
Your electrical system has some
problems
Ask a professional technician to
check your electrical system
Cables are damaged Contact after sales service
or professional technician for
inspection and fixing
Battery voltage not correct
(6V or 12V)
If the battery is not 6V or 12V, do
not use the charger to charge it
Battery voltage level is under 2V The battery voltage is too low and it
cannot be recharged
Poor connection between
connectors
Reconnect the connectors
Reverse polarity Reconnect the clamps or eyelets
Overheat Appliance has been used too long Switch off and keep the charger
unused until it cool down
To Next Page
Loading...
