NORAUTO HF400 - Product Presentation; Technical Information

86
- Multi-step microprocessor controlled charge.
- Charge with clamps.
- Reverse polarity indicator.
- Automatic power outage recovery.
- Automatic floating mode at the end of the charging process
- Short circuit protection
Model
Input
Output
Fuse
Battery type
Charging current
Capacity
HF400
220-240V AC, 50/60Hz, 1.2A
12Vdc, 4A
4A
Lead Acid, WET, GEL, AGM
4 Amp
12V batteries / 10Ah to 80 Ah (up to 260Ah in floating mode)
PRODUCT PRESENTATION
A. Technical information
- Worn-out batteries must be safely scrapped. Read the
“Disposal of this product” chapter in this manual to learn
more about recycling and environment protection.
- Respect the technical specifications of the batteries that you
want to charge, along with the corresponding specific
recommendations (for example: how to insert and connect
the battery, charge rate, etc.).
- Do not recharge dry-cell batteries commonly used in
household appliances. It may cause a fire and damage to
persons.
- This appliance must be used exclusively on automotive
vehicle batteries with 12Vdc voltage. Do not connect the
appliance to other type of systems (6Vdc, 24Vdc, etc.).
SAFETY INSTRUCTIONS REGARDING BATTERIES