EasyManua.ls Logo

NORAUTO NS-211 - TUNER OPERATION; Auto Store; RDS (RADIO DATA SYSTEM)

NORAUTO NS-211
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
54
Band
During radio play, press the [BAND] button to
choose between three FM, two MW bands.
The indication MW, FM appears on the
display panel according to your selection.
Up Tuning
Press the seek up [ ] button to tune
stations upward step-by-step. The current
frequency will be shown in digital format on
the display panel.
Press and hold the seek [ ] button to the
next available station.
Down Tuning
Press the seek down [ ] button to tune
stations downward step-by-step.
Press and hold the seek down [ ] button
to the previous available station.
Auto Store
Press the [PS/AS] button to scan preset
stations 1-6. Hold it to automatically select six
stations and store them in the current band.
The new stations replace stations already
stored in that band.
TUNER OPERATION
RDS service availability varies with areas.
Please understand if RDS service is not
available in you area, the following service is
not available.
RDS Basics
AF (Alternative Frequency): When the radio
signal strength is poor, enabling the AF
function will allow the unit to automatically
search another station with the same PI
(Program Identication) as the current station
but with stronger signal strength.
PS (Program Service name): The name of
station will be display instead of frequency.
AF Mode: Long press the [DISP] to enter
menu mode, then Press [ ] or [ ]
button to show AF mode, rotate the knob to
select AF ON or OFF.
AF on: AF function is activated.
AF off: AF function is disabled.
Remark: AF indicator on LCD will flash until
RDS information is received. If RDS service
is not available in your area, turn off the AF
mode.
REG Mode: Long press the [DISP] to enter
menu mode, then Press [ ] or [ ]
button to show AF mode, rotate the knob to
select REG mode on and off.
REG on: AF function will implement the
regional code (of the PI) and only stations in
the current region can be tuned automatically.
REG off: AF function will ignore the regional
code(of the PI) and stations in the other
regions can also be tuned automatically.
CT Service ( Clock Time )
When receiving an RDS station, the CT (Clock
Time) service automatically adjusts the time.
Trafc Announcements
Some RDS FM stations periodically provide
trafc information.
TP (Trafc Program Identication)
Broadcasting of trafc information.
TA (Trafc Announcements Identication)
Radio announcements on trafc conditions.
TA Mode: Press the [EQ] for more than 2
seconds to turn on/off the TA function. When
RDS (RADIO DATA SYSTEM)

Table of Contents

Related product manuals