NORAUTO NS-318 DBT - System Control and Operation; Power, Source, and Audio Settings; Radio Mode and Band Selection

EN
126
Control and operation
General controls
Turn the device on/off, mute volume
Press the vol knob to turn the power on.
Press and hold the vol knob to turn the power off.
In any mode , press the vol knob to activate or deactivate mute.
Selecting a source
Press the MOD button to select the
source or press
to switch to the
home page and select the source
you wish to use.
Audio settings
Press SEL in any mode to set Speaker Volume/EQ mode/DSP/
Display parameters, rotate the volume knob to change the value,
then press SEL to skip to the next option.
Equaliser
Press SEL button and select EQ, rotate the volume knob
repeatedly to select the equaliser (Standard Classic, Rock, Pop,
Jazz, Electric, Custom).
Radio
Selecting a mode
During operation, repeatedly press the MOD button and select the
radio mode.
Selecting a broadcast band width
Press the BND button repeatedly to select frequency band. Up to
6 stations can be stored in each frequency band and selected with
the shortcut buttons.