S
Sheila TaylorJul 26, 2025
What to do if "READY" is not on after connecting NORAUTO START PLUS 2223450?
- WWilliam WatsonJul 26, 2025
If the "READY" indicator doesn't light up on your NORAUTO Extender after connecting everything properly, it could be due to the connected battery's voltage being either below 2V or above 12.6V. Ensure your car battery is 12V. Charge your car battery if necessary. Also, try removing all loads such as the heater, air conditioner, or lights, and then try again.