What to do if I see a 'Lead OFF' message on Norav Medical Equipment?
If you're seeing a 'Lead OFF' message, make sure you've prepped the patient's skin according to instructions. Also, ensure the electrodes are properly applied and that the leads are making good contact with the electrodes. If the issue continues, try replacing the patient ECG cable.
Why am I getting noise artifacts on the ECG signal with my Norav Medical device?
Noise artifacts on the ECG signal can occur if the patient's skin isn't properly prepped, the electrodes aren't correctly applied, or the leads aren't making good contact. Ensure you've prepared the patient’s skin according to the instructions, the electrodes are properly applied to the patient, and the leads are making proper contact with the electrodes. Replacing the patient ECG cable can also help.
General| Brand | Norav Medical |
|---|---|
| Model | NR-1207-E |
| Category | Medical Equipment |
| Language | English |
To Next Page
