*NORCOLD E.S.P.
Models 662, 663, 682, and 683
EXTENDED COOLING UNIT SERVICE PROTECTION PLAN
An additional four year Service Contract is now
E.S.P. is a service contract between Norcold and
available to original purchasers of Norcold refrig-
the original purchaser. The contract provides re-
erators. For only $40.00 you get:
placement of a defective cooling unit only for this
refrigerator (freight, parts, and labor) for an addi-
*
Four extra years protection against cooling unit
tional period of four years after expiration of the
failure.
original Limited Warranty. The refrigerator must be
delivered to Norcold Service Center together with
•
Automatic replacement of defective cooling unit.
the Norcold E.S.P. card showing E.S.P. coverage.
An E.S.P. card will be mailed to the original pur-
• Pre-paid freight from your dealer to Norcold and
chaser upon receipt of a completed Service Con-
return.
tract Application form and a check covering the
E.S.P. charge. E.S.P. coverage is non-transferable
•
Labor free of charge.
and non-refundable.
To register your refrigerator, fill out the warranty
The E.S.P. (Extended Service Protection) plan
Service Contract Application - i.e.: Tear Sheet
can be obtained by mailing your check for $40.00*,
Form in yellow envelope or include the following
U.S. funds to:
information (Please Print Clearly):
NORCOLD
P 0 BOX 4248
SIDNEY OH 45365-4248
If mailing in Canada:
GREG LUND PRODUCTS LTD
P
0
BOX 760
OAKVILLE ONTARIO CANADA L6J 5C4
1.
Owner's name and address.
2.
Refrigerator model number.
3.
Refrigerator serial number.
4.
Date of purchase.
5.
Check for $40.00* (payable to Norcold).
Applications will be accepted only if they are mailed
within ninety (90) days
after
date of purchase.
*Ohio residents, add $2.60 sales tax.
General Instructions - All Models
The refrigerators described herein are designed and
certified for built-in installations. They must be in-
stalled on a solid floor and secured by screws
THIS REFRIGERATOR IS NOT INTENDED TO BE
through holes provided. In making provisions for the
OPERATED AS A FREE STANDING UNIT (I.E.
installation, the following must be considered:
WHERE THE PRODUCTS OF COMBUSTION ARE
a.
Adequate ventilation (See section on "Ventila-
NOT COMPLETELY SEALED OFF FROM THE LIV-
tion Requirements").
ING AREA) OR INSTALLED IN SUCH A WAY AS
b.
Minimum clearance to combustible materials: 0"
TO CONFLICT WITH THESE INSTALLATION IN-
back, sides, bottom, top, is acceptable on these
STRUCTIONS. UNAPPROVED INSTALLATIONS
models.
COULD RESULT IN SAFETY RISKS OR PER-
c.
Adequate seal between refrigerator mounting
FORMANCE PROBLEMS.
flange and cut-out opening. (See Figure 12)
A
WARNING
3
To Next Page
Loading...