EasyManua.ls Logo

Norcold AC Series - Ventilation Requirements; Installation Options and Door Reversal

Norcold AC Series
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
Be sure the refrigerator is not in direct sunlight or near a gas stove, a heater, or other
heat-generating appliances. Avoid installing your refrigerator close to warm water
lines or warm air ducts.
Your refrigerator was thoroughly cleaned before shipment from the factory. It is ad-
visable, however, to clean the interior once more before using. Wipe the interior with
a cloth and warm water. Then wipe with a dry cloth.
Ventilation
Sufcient ventilation (airow) over the rear mounted condenser of the refrigerator is
necessary for the refrigerator to operate correctly (See Art01893).
* NOTE: The fan will operate only when the ambient temperature is higher than ap-
proximately 95° F.
CAUTION: Do not remove the
bottom rails from the refrigerator
cabinet. The rails supply space
under the refrigerator that is nec-
essary for correct ventilation.
If you do not make sure that the
ventilation is correct, a short-
ened refrigerator life expectancy,
poor refrigeration, continuous
operation, accelerated battery
discharge and a void warranty
will result.
Installation Options
Install a decorative door panel
NOTE: The decorative door panel must
be 4 mm or less in thickness.
1. Remove the door from the refrigera-
tor by removing the two (2) bolts that
attach the door hinge to the bottom of
the refrigerator (See Art01894).
!
Air outlet
Air inlet
Fan*
Rails
Art01893
Art01894
Door hinge
Bolts

Related product manuals