14
2. Connect the DC power supply wires:
If the DC power supply leads are attached incorrectly, damage
to the refrigerator power supply will occur.
- Connect the positive (+) DC power supply lead to the red wire of the refrigerator.
- Connect the negative (-) DC power supply lead to the black wire of the refrigerator.
- Make sure that:
- Each DC power supply lead is attached to the correct polarity wire of the refrig-
erator power supply.
- The chassis or the vehicle frame is not used as one of the conductors.
- The DC power supply wires including the fuses are routed directly from the bat-
tery to the refrigerator.
- The wire connections must be clean, tight and free of corrosion. If any of these
items are not correct:
- A voltage drop to the refrigerator will occur.
- The voltage drop will decrease the cooling performance of the refrigerator.
Disconnect the positive (+) DC power supply wire from the
battery before you do a “fast charge” of the battery. Failure to
disconnect the positive (+) power supply wire from the battery
during a “fast charge” can cause damage to the refrigerator or
other DC appliances.
CAUTION
!
CAUTION
!
To Next Page
Loading...
