Need help?Do you have a question about the Nord Drivesystems SK 9016.1 and is the answer not in the manual?
General| Voltage | 400 V |
|---|---|
| Frequency | 50 Hz |
| Number of poles | 4 |
| Efficiency class | IE3 |
| Protection class | IP55 |
Provides general information, safety symbols, and correct usage guidelines for gear units.
Details safety precautions, other relevant documents, and proper disposal procedures.
Explains gear unit type designations and the information found on the type plate.
Guidelines for short-term and long-term storage of gear units, including environmental conditions.
Steps to prepare the drive unit for installation, including inspection and checking rotation direction.
Instructions for installing the gear unit and mounting components like hubs and shrink discs onto shafts.
Details on fitting covers, attaching motors, retrospective paintwork, and installing the cooling coil.
Procedures for checking oil level and activating the automatic lubricant dispenser before operation.
Guidance on operating with lubricant cooling, water cooling, and the running-in period for worm gear units.
A checklist to ensure all necessary steps are completed before commissioning the gear unit.
Outlines the recommended intervals for visual inspection, checks, re-greasing, and overhauls.
Detailed procedures for visual inspection, noise checks, oil level, re-greasing, dispenser replacement, oil changes, and general overhaul.
Explanation of symbols for versions and an overview of maintenance-related information.
Provides torque values for screw connections and guidance for troubleshooting common gear unit malfunctions.
Lists compatible lubricants for roller bearings and gear units, and specifies lubricant quantities.
To Next Page