Nord Drivesystems SK 9032.1 User Manual

Intelligent Drivesystems, Worldwide Services
B1000
Operating and Maintenance Instructions for
Gear Units and Geared Motors
GB
DRIVESYSTEMS
0

Nord Drivesystems SK 9032.1 Specifications

General

Number of Poles	4
Motor Voltage	400 V
Motor Frequency	50 Hz
Voltage	400 V
Frequency	50 Hz

Summary

Notes on Gear Unit Operation and Safety

Safety and Information Symbols Explained

Explanation of warning and information symbols used in the manual.

Intended Use of Gear Units

Defines intended use and compliance with EU machinery directives.

General Safety Information and Precautions

General safety regulations for installation, operation, and maintenance.

Storage, Preparation, and Installation Procedures

Pre-Installation Checks and Preparation

Pre-installation checks and necessary procedures.

Gear Unit Installation Guidelines

Instructions for correctly mounting the gear unit.

Fitting Hubs onto Gear Shafts

Procedures for attaching hubs to the gear unit shafts.

Fitting Push-on Gear Units

Methods for fitting push-on type gear units onto shafts.

Mounting Shrink Discs

Detailed steps for mounting shrink discs on shafts.

Attaching Standard Motors

Guidelines for attaching standard motors to gear units.

Commissioning Procedures for Gear Units

Checking the Oil Level Before Operation

Activating the Automatic Lubricant Dispenser

Service and Maintenance Guidelines

Service and Maintenance Intervals

Service and Maintenance Work Procedures