Need help?Do you have a question about the Nord Drivesystems SK 9086.1 and is the answer not in the manual?
General| Insulation Class | F |
|---|---|
| Ambient Temperature | -20°C to +40°C |
| Type | Asynchronous motor |
| Voltage | 400 V |
| Frequency | 50 Hz |
| Number of Poles | 4 |
| Efficiency Class | IE3 |
| Protection Class | IP55 |
Please always observe the following safety and information symbols!
All work including transportation, storage, installation, electrical connection, commissioning, servicing, maintenance and repair must be performed only by qualified specialist personnel.
Inspection and preparation steps before installing the drive unit.
Instructions for correct installation of gear units, including safety precautions.
Table of maximum permitted motor weights and guidelines for attaching standard motors.
Procedure for checking the oil level before commissioning the gear unit.
Table outlining service and maintenance intervals and corresponding work.
General procedures for servicing and maintenance, emphasizing qualified personnel.
Detailed steps for checking the oil level in gear units with and without oil level screws.
Step-by-step guide for draining and refilling gear units with oil.
Common gear unit malfunctions, their possible causes, and remedies.
To Next Page