EasyManua.ls Logo

Nord Drivesystems SK 972.1 User Manual

Nord Drivesystems SK 972.1
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Intelligent Drivesystems, Worldwide Services
B1000
Operating and Maintenance Instructions for
Gear Units and Geared Motors
GB
DRIVESYSTEMS
0
Question and Answer IconNeed help?

Do you have a question about the Nord Drivesystems SK 972.1 and is the answer not in the manual?

Nord Drivesystems SK 972.1 Specifications

General IconGeneral
BrandNord Drivesystems
ModelSK 972.1
CategoryEngine
LanguageEnglish

Summary

1. Notes

1.2 Safety and Information Symbols

Please always observe the following safety and information symbols for danger, attention, and notes.

1.4 Safety Information

2.2 Type Plate

3. Storage, Preparation, Installation

3.3 Preparing for Installation

3.4 Installing the Gear Unit

3.5 Fitting Hubs on Gear Shafts

3.6 Fitting Push-on Gear Units

3.7 Fitting Shrink Discs

3.8 Fitting Covers

3.9 Fitting a Standard Motor

3.11 Fitting the Cooling Coil

4. Commissioning

4.2 Activating the Automatic Lubricant Dispenser

Step-by-step guide to activate the automatic lubricant dispenser for rolling bearings on certain gear unit types.

4.3 Operation with Lubricant Cooling

4.4 Running-In Time for Worm Gear Units

4.5 Checklist

5. Service and Maintenance

5.1 Service and Maintenance Intervals

Outlines intervals for visual inspection, noise check, oil level check, re-greasing, oil changes, and general overhauls.

5.2 Service and Maintenance Work

Details on performing visual inspections, checking for running noises, and checking the oil level, emphasizing qualified personnel.

5.2 Detailed Oil Level Check

Procedure for checking oil level on gear units with and without oil level screws or vessels, ensuring correct level.

6. Appendix

6.3 Troubleshooting

Lists common gear unit malfunctions, their possible causes, and recommended remedies, with a safety warning.

Related product manuals