10
7. Attach the Left Handrail (88) to the Left Upright
(89) with two 5/16" x 1" Screws (5) and a 5/16" x
1 1/2" Bolt (4). Do not fully tighten the Screws
a
nd the Bolt yet.
A
ttach the Right Handrail (87) in the same
way.
Slide the Upright Wire (81) to the right side of
the indicated bracket. Be careful not to pinch
the Upright Wire between the Left Outside
Handrail Cover (80) and the bracket.
Remove and discard the four indicated Screws
(A).
7
89
88
87
4
4
5
5
80
81
Bracket
8. Set the console assembly face down on a soft
surface to avoid scratching the console
assembly.
Remove the eight indicated Screws (B). Next, lift
off the Crossbar (93) and the Console Frame
(104). Discard the eight Screws.
93
Console
Assembly
B
8
B
B
B
A
A
B
104
To Next Page
Loading...
