R
Robert GrimesAug 8, 2025
How to fix NordicTrack NTL20116.0 when the power does not turn on?
- JJoseph RodriguezAug 9, 2025
First, ensure the power cord is properly connected to a surge suppressor, and that the surge suppressor is plugged into a grounded outlet. If your treadmill is connected to an AFCI-equipped outlet and the circuit breaker trips repeatedly, consider purchasing an arc filter (refer to the front cover of this manual). Also, check the power switch located on the treadmill frame near the power cord. If the switch protrudes, indicating it has tripped, wait five minutes before pressing it back in to reset.