EasyManua.ls Logo

NordicTrack NTL1095.3 - User Manual

NordicTrack NTL1095.3
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
USER'S MANUAL
CAUTION
Read all precautions and instruc
-
tions in this manual before using
this equipment. Save this manual
for future reference.
Serial Number Decal
Model No. NTL1095.3
Serial No.
Find the serial number in the location
shown below. Write the serial number
in the space above for reference.
Visit our website at
www.nordictrack.com
new products, prizes,
fitness tips, and much more!
V
QUESTIONS?
If you have questions, or if there
are missing parts, we will guar-
antee complete satisfaction
through direct assistance from
our factory.
TO AVOID DELAYS, PLEASE
CALL DIRECT TO OUR TOLL-
FREE CUSTOMER HOT LINE.
The trained technicians on our
Customer Hot Line will provide
immediate assistance, free of
charge to you.
CUSTOMER HOT LINE:
1-888-825-2588
Mon.–Fri., 6 a.m.–6 p.m. MST

Questions and Answers

  • C
    Corey JonesAug 12, 2025
    What to do if my NordicTrack Treadmill power turns off during use?
    • Y
      Yvonne MyersAug 12, 2025
      If your NordicTrack Treadmill's power turns off during use, first check the reset/off circuit breaker and reset it if tripped, waiting five minutes before pressing the switch. Ensure the power cord is securely plugged in; if it is, unplug it, wait five minutes, and plug it back in. Also, remove and reinsert the key fully into the console. If the treadmill still won't run, consult the front cover of the manual.
  • A
    Ashley LarsonAug 20, 2025
    How to fix a NordicTrack Treadmill that does not turn on?
    • O
      oscarburtonAug 20, 2025
      If your NordicTrack Treadmill doesn't turn on, ensure the power cord is plugged into a surge suppressor that's plugged into a grounded outlet, using only a single-outlet surge suppressor meeting the specifications. Note: the treadmill isn't compatible with GFCI outlets. After plugging in, ensure the key is fully inserted into the console. Also, check the reset/off circuit breaker on the frame near the power cord. If it protrudes, the breaker tripped; wait five minutes, then press the switch to reset.
  • S
    Sandra McdonaldAug 27, 2025
    How to fix a NordicTrack Treadmill walking belt that is off-center or slips?
    • J
      Jon JohnsonAug 27, 2025
      If your NordicTrack Treadmill's walking belt is off-center, remove the key and unplug the power cord. If the belt has shifted left, turn the left rear roller bolt clockwise 1/2 turn. If it shifted right, turn the left rear roller bolt counterclockwise 1/2 turn. Avoid overtightening. Plug in the power, insert the key, and run for a few minutes, repeating until centered. If the belt slips, remove the key and unplug the power cord. Turn both rear roller bolts clockwise 1/4 turn. The belt should be tight enough to lift each side 3–4 inches. Keep the belt centered. Plug in, insert the key, and walk for a few minutes, repeating until properly tightened.
  • J
    Jaime FuentesSep 4, 2025
    Why does my NordicTrack NTL1095.3 Treadmill walking belt slow down when I walk on it?
    • D
      Daniel SnyderSep 4, 2025
      If the walking belt on your NordicTrack Treadmill slows when you walk on it, use only a single-outlet surge suppressor that meets all specifications. If the walking belt is overtightened, remove the key and unplug the power cord. Using an allen wrench, turn both rear roller adjustment bolts counterclockwise, 1/4 of a turn. When correctly tightened, you should be able to lift each side of the walking belt 3 to 4 inches off the platform. Keep the belt centered. Plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until properly tightened. If the issue persists, consult the front cover of this manual.

NordicTrack NTL1095.3 Specifications

General IconGeneral
Model NumberNTL1095.3
Running Area20" x 60"
Speed0-12 MPH
Speed Range0-12 MPH
FoldableYes
Incline12%
iFit CompatibilityYes
Weight Capacity300 lbs

Related product manuals