NordicTrack NTL2295.0 User Manual

9
8. Press the right Upright Cover (75) onto the right Upright
(20). Attach the Upright Cover with a Cover Screw (90).
Repeat this step on the other side (not shown).
20
75
90
8
9. Make sure that all parts are properly tightened before you use the treadmill. Keep the included allen
wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 31).
To protect the
floor or carpet from damage, place a mat under the treadmill.

NordicTrack NTL2295.0 Specifications

General

Brand	NordicTrack
Model	NTL2295.0
Category	Treadmill
Language	English