NordicTrack VAULT - Attaching Cabinet to Base

7
2
2. Locate the four holes in the Base (6), and then
locate the front edge (A) and the rear edge (B) of
the Base; the holes are closer to the rear edge.
Tip: Avoid scratching the Base (6). With the
help of a second person, set the Cabinet (1) on
the Base as shown. Attach the Cabinet with four
M8 x 16mm Screws (30); start all the Screws,
and then tighten them.
1
6
A
30
30
B
Avoid
scratching
the Base (6)