NordicTrack E8200 Competition Bench User Manual

Model No. NTEVBE1378.0
Serial No.
Write the serial number in the
space above for future reference.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Serial Number Decal (under seat)
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you have
questions, or if there are missing
parts, please contact us at the
numbers or addresses listed
below:
Call: 08457 089 009
Outside UK: 0 (44) 113 3877133
Fax: 0 (44) 113 3877125
E-mail: csuk@iconeurope.com
Write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road, Beeston
Leeds, LS11 8JG
UK
USERʼS MANUAL

NordicTrack E8200 Competition Bench Specifications

General

Brand	NordicTrack
Model	E8200 Competition Bench
Category	Home Gym
Language	English

Summary

Product Support and Contact Information

Contacting Customer Support

Provides phone, fax, and email details for assistance.

Equipment Safety Caution

General warning advising users to read precautions before operation.

Critical Safety Precautions

User Safety and Equipment Usage Guidelines

Lists 16 essential precautions for safe operation and maintenance.

Assembly Instructions

Initial Assembly: Stabilizers and Bench Frame

Guides through attaching bench stabilizers and the main bench frame.

Front Leg and Leg Lever Assembly Steps

Details attaching the front leg, leg lever, and associated hardware.

Backrest and Seat Assembly Steps

Covers attaching backrest frames, backrest, and seat components.

Seat Frame and Leg Lever Pad Assembly Steps

Focuses on seat frame, leg lever pads, and curl pad attachment.

Curl Bar and Upright Assembly Steps

Guides attachment of curl bar, uprights, and weight storage tubes.

Weight Carriage and Spotter Assembly Steps

Covers weight carriage, adapters, spotters, and locking bar installation.

Weight Bar Adapters and Cable Routing Steps

Details weight bar adapter installation and initial cable routing.

Barbell Rests and Hinge Frame Assembly Steps

Covers barbell rest, spotter, and hinge frame attachment.

Adjustments and Customization

Adjusting the Backrest and Seat Positions

Adding Weights to Barbell and Weight Carriage

Attaching Accessories to Low Pulley Station

Using the Leg Lever for Exercises

Attaching Accessories to High Pulley Station

Setting Barbell Rests and Spotters

Adjusting the Main Exercise Arms

Cable Routing Diagram and Guide

Diagram of Cable Paths for All Stations

Exploded Component Drawings

Exploded Drawing A: Bench Assembly Details

Exploded Drawing B: Frame, Uprights, and Supports

Exploded Drawing C: Pulley and Cable System Details

Exploded Drawing D: Arm Mechanisms and Adapters

Ordering Replacement Parts

Required Information for Ordering Replacement Parts