15
1
15
ATTACHING THE CURL BAR
Attach the Curl Bar (112) to the Leg Lever (110) with
t
he Curl Pin (115).
110
112
USING THE LEG LEVER
To use the Leg Lever (110), slide the desired weights
(not included) onto the Leg Lever. Secure the weights
with a Large Spring Collar (27).
See the inset drawing. To use standard wieghts,
remove the Weight Adapter (156) from the Leg Lever.
slide the desired weights (not included) onto the Leg
Lever. Secure the weights with a Small Spring Collar
(153). You can store unused weights on the weight
storage tubes (not shown) on the uprights.
WARNING: Do not put more than
150 lbs. (68 kg) on the Leg Lever (110). Always
secure weights with a Large or Small Spring
Collar (27, 153).
156
Weight
27
110
USING THE BARBELL RESTS AND THE BARBELL
SPOTTERS
Before using a separate barbell (not included), set the
Barbell Spotters (29) at the lowest point to which you
want your barbell to move. To do this, see step 20 on
page 12.
Adjust the two Barbell Rests (30) in the same way.
WARNING: Always adjust both
Barbell Spotters (29) and both Barbell Rests
(30) to the same height.
29
30
29
30
156
110
Weight
153
To Next Page
Loading...
