EN - 16 -
Tips for saving energy
1. Install the appliance in a cool, well ventilated room , but not in direct sunlight and not near
heat source (radiator, cooker.. etc). Otherwise use an insulating plate.
2. Allow ward food and drinks to cool down outside the appliance.
3. When placing, drinks and slops they must be covered. Otherwise humidity increases at
the appliance. Therefore the working time gets longer. Also covering drinks and slops
helps to save smell and taste.
4. When placing food and drinks, open the appliance door as briey as possible.
5. Keep close the covers of any different temperature compartment in the appliance (crisper,
chiller ...etc ).
6. Door gasket must be clean and pliable. Replace gaskets if worn.
To Next Page
Loading...
