Nordson CoolWave 2 - New Contactor; Replacing the Control Board and Contactor; Removing the Old Control Board and Contactor

Coolwave 2 Replacement Board and Contactor
2
Part 1099054-02
E 2018 Nordson Corporation
New Contactor
New 24Vdc Contactor
Old 230V 50/60 Hz
Contactor
Figure 2 Old and New Versions of Contactor
Replacing the Control Board and Contactor
Removing the Old Control Board and Contactor
1. Remove electrical power from unit.
2. See Figure 3. Remove the six M5 screws from the power supply cover.
Remove the cover and set it aside.
Figure 3 Remove Cover Screws